calling all viscous lsd owners
Moderators: IMC, Club Staff
-
- Apprentice
- Posts: 68
- jedwabna poszewka promocja
- Joined: Thu Nov 17, 2011 6:33 pm
calling all viscous lsd owners
hey guys. need your help. i have a viscous lsd in my gearbox and need a new shaft, the original shaft was stuffed and thrown out. its proving impossible to find the shaft anywhere so was hoping some one could help me out if the know the part numbers or have one in their fto an wouldn't mind sharing the vin with me so i can find it using the Mitsubishi data base
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: calling all viscous lsd owners
PHIL069's 95 FTO GPX
Welcome to my ride.
What it has so far.......
-Viscous LSD...
DE3A0015318
You're welcome
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
-
- Apprentice
- Posts: 68
- Joined: Thu Nov 17, 2011 6:33 pm
Re: calling all viscous lsd owners
thanks mate, and that was an option put in the car from factory?
sorry to be anal but its what mitsubishi told me to check
sorry to be anal but its what mitsubishi told me to check
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: calling all viscous lsd owners
As far as I know all the numbers on my car match from factory.
I'm sure I did a VIN decode years ago which showed the numbers, not Complete FTO, an overseas site.
But I can't be 100% sure.
These are the "complete axle" part numbers that come up with my VIN#
RH = MR196436
LH = MR196435
I'm sure I did a VIN decode years ago which showed the numbers, not Complete FTO, an overseas site.
But I can't be 100% sure.
These are the "complete axle" part numbers that come up with my VIN#
RH = MR196436
LH = MR196435
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: calling all viscous lsd owners
Actually I believe I done my VIN# search at Mitsubishi Japan site.
I don't have time to research tonight, but I might get time to research tomorrow.
I don't have time to research tonight, but I might get time to research tomorrow.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
-
- Apprentice
- Posts: 68
- Joined: Thu Nov 17, 2011 6:33 pm
Re: calling all viscous lsd owners
thanks heaps, ill see what those numbers bring up tomorrow
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: calling all viscous lsd owners
Mine is def factory standard... let me know if Phils doesn't pull the right numbers
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: calling all viscous lsd owners
Mike, do you want to flick me your VIN? Your's will have the viscous LSD. CAPS/ASA only narrows it down to the full 'joint kit', but that would be a start.
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: calling all viscous lsd owners
DE3A0019068
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: calling all viscous lsd owners
Hmmm, based on that chassis number, ASA is wrong.
It's feeding me the same part number for both sides: MR232222. Which makes no sense as we know both are different.
It's feeding me the same part number for both sides: MR232222. Which makes no sense as we know both are different.
- Technikhaus
- Oldtimer
- Posts: 3656
- Joined: Wed Dec 28, 2011 4:45 pm
- Location: Dunedin - NZ
- Contact:
Re: calling all viscous lsd owners
Odd, it shows different PNCs but then the same part number but different part names...
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: calling all viscous lsd owners
Yeah that's weird... unless it's for a set? Unlikely... know where the part number would be on the shaft?
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: calling all viscous lsd owners
Try this one... a manual COTY built the same week.
DE3A0019005
Or this... The last COTY built:(auto)
DE3A0019836
DE3A0019005
Or this... The last COTY built:(auto)
DE3A0019836
- Technikhaus
- Oldtimer
- Posts: 3656
- Joined: Wed Dec 28, 2011 4:45 pm
- Location: Dunedin - NZ
- Contact:
Re: calling all viscous lsd owners
Same result as before.
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: calling all viscous lsd owners
Yup, same same
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: calling all viscous lsd owners
this is fucked! if it wasnt dark id go measure them LOL
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: calling all viscous lsd owners
We know the measurements, we need the part numbers!SchumieFan wrote:this is fucked! if it wasnt dark id go measure them LOL
- Shhtuart
- Forum Moderator
- Posts: 1747
- Joined: Sun Aug 05, 2007 5:00 pm
- Location: Melbourne
- Contact:
-
- Apprentice
- Posts: 68
- Joined: Thu Nov 17, 2011 6:33 pm
Re: calling all viscous lsd owners
Any more luck guys.